HDC
Inc. is a power locking, security and component supplier, manufacturer
and distributing company.
 |
 |
|
|
  |
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
Part
No:
PLI-C, D
PLI-C, D
Includes
clear cover. Use on double wall constructed door. When ordering specify
lock (C) 2.650" Sliding Bolt, or (D) Rivet Style Lock.
Fire/Rescue/Service Vehicles
Fire/Rescue/Service Vehicles
Part
No::
PLII
PLII
Retrofits
and replaces all .750" to 1.000" cam locks
Kit inlucdes replacement lock, wire linkage and clear
cover. Typically used on double wall constructed
doors.
Fire/Rescue/Service Vehicles
Kit inlucdes replacement lock, wire linkage and clear
cover. Typically used on double wall constructed
doors.
Fire/Rescue/Service Vehicles
Part
No:
PLII-S
PLII-S
Retrofits
many latches that use a .750" cam lock.
PLII-S is sold without a mounting base. The original
OEM lock to remain as the key override in paddle
latches.
Fire/Rescue/Service Vehicles
Part
No:
PLIV
PLIV
Lock
I.D. (A) 2.000" Sliding Bolt, (B) 2.250" Sliding
Bolt, (C) 2.650" Sliding Bolt Actuator is loose
allowing flexibility in its installation. Used with both
single & double wall doors. (Includes adhesive
mounting base.)
Ambulance/Motor Coach/Fire/Rescue/Service
Bolt, (C) 2.650" Sliding Bolt Actuator is loose
allowing flexibility in its installation. Used with both
single & double wall doors. (Includes adhesive
mounting base.)
Ambulance/Motor Coach/Fire/Rescue/Service
Part
No:
PLV
PLVe
PLV
PLVe
Retrofits
and replaces all .750" to 1.000" cam locks.
Kit Includes replacement lock and wire linkage.
Typically used on double wall constructed doors.
Fire/Rescue/Service Vehicles
Kit Includes replacement lock and wire linkage.
Typically used on double wall constructed doors.
Fire/Rescue/Service Vehicles
Part
No:
PLVII
PLVII
Dead
bolt lock used for roll-up doors, van cargo
doors, cargo compartment doors and armored
vehicles. This lock is ideal for positive dead bolt
sliding lock on non-personnel doors.
doors, cargo compartment doors and armored
vehicles. This lock is ideal for positive dead bolt
sliding lock on non-personnel doors.
Part
No:
PL801
PL801
Adhesive
Mounting Base used with our PLIII’s and PLV’s.
The dimensions are 2" x 4.5". Includes nylon locking nuts.
Part
No:
C1
C1
Clear
Cover. Intended use for MES actuators
Part
No:
ACT-R
ACT-R
Spring
Detent Actuators,
two wire MES actuators
Part
No:
ACT-B
ACT-B
Direct
Drive, two wire MES actuators
Part
No:
MESFRA
MESFRA
Clutch
Drive Actuators. Five wire MES Swiss made actuator. Friction reduced for
ease of use during key
over-ride. Can be used with any power lock capable hardware.
over-ride. Can be used with any power lock capable hardware.
Part
No:
PD Series
PD Series
PD
Series actuators reduce installation time with a
link-pin connection. They offer a greater degree of
install orientation and reduce parts needed for installation.
link-pin connection. They offer a greater degree of
install orientation and reduce parts needed for installation.
Part
No:
J236
J236
Replacement
lock, 5/8” long barrel J236 lock with
lazy action cam lock works with RA spring detent type actuators. Includes nylon rod connector and linkage.
lazy action cam lock works with RA spring detent type actuators. Includes nylon rod connector and linkage.
About HDC Inc - Contact Us - Home
This website copyright © 2002-2006 - HDC Inc. All Rights Reserved
Power Locking, Security Products, Hardware and Components for Fleets, Trucks, Ambulances, Service Vehicles, RV's, Motor Coaches, Toy Haulers, Trailers